English-first OBD-II diagnostics Static, fast, focused lookup pages
CD CheckDTC Garage-grade fault lookup
Open P0300 Try AI Diagnose
Home / Codes / P0348
DTC code page

P0348: Camshaft Position Sensor A Circuit High Input (Bank 2)

Quick answer: The ECU sees the Bank 2 camshaft position sensor A circuit voltage or signal level too high.

Drivers also search this fault as bank 2 cam sensor high input, bank 2 camshaft sensor high voltage, bank 2 cam circuit signal high.

Severity: high Family: powertrain Related paths: 10
Meaning

What P0348 usually means

P0348 means the Bank 2 cam sensor A input is biased high or otherwise outside the normal upper range. In practice that often means short-to-voltage, connector damage, moisture, or an internal sensor fault that makes the ECU see an abnormal high signal instead of a believable switching pattern.

Fast triage

Start here before chasing parts

  • Scan first: save freeze-frame and pending codes before clearing anything.
  • Confirm the complaint: compare the stored code with current drivability symptoms.
  • Use context: trims, live data, and related codes usually narrow the fault faster than guesswork.
  • Work simplest to hardest: leaks, connectors, maintenance items, and known patterns before expensive components.
Initial checks

What to check first

  • Inspect the Bank 2 harness path for rub-through or melt damage before replacing parts.
  • Ask whether the problem started after engine work, valve-cover service, or harness movement.
  • Compare the wording of the code with actual startup and sync behavior because high-input faults can still cause no-start symptoms.
Driving risk

Can you keep driving?

P0348 can create real sync and restart problems, so it should be diagnosed promptly.

High urgency: If symptoms are active, reduce driving and diagnose quickly before secondary damage builds.
Likely causes

Common causes behind this code

  • Short-to-voltage in the Bank 2 cam sensor signal circuit
  • Internal Bank 2 cam sensor fault causing abnormal output
  • Connector damage, moisture intrusion, or spread terminals
  • Harness damage near the Bank 2 cylinder head or front cover
  • Reference or ground fault affecting signal interpretation

Cause phrases often tied to this code: short to voltage, sensor internal fault, connector damage, harness fault, reference issue.

Diagnostic order

Suggested workflow

  1. Inspect the Bank 2 connector and harness for short-to-voltage damage.
  2. Check scan data for sync loss or abnormal cam-signal status during the failure.
  3. Verify circuit integrity for the sensor type used on the engine.
  4. Test the Bank 2 sensor if wiring checks do not expose the cause.
  5. Confirm the repair with repeated hot and cold restarts.
Avoid guesswork

Common mistakes

  • Replacing VVT hardware before proving the Bank 2 cam circuit is healthy.
  • Ignoring moisture or terminal damage inside the connector.
  • Calling it a sensor problem without checking the harness first.
Repair path

Practical fix guidance

  • Fix the circuit bias or abnormal sensor output first, then recheck for any remaining Bank 2 timing faults.
  • If correlation codes remain after the electrical repair, move into mechanical timing diagnosis instead of stopping early.
Vehicle context

Affected brands in this MVP

Brand hubs help broaden internal linking now and can evolve into make-specific diagnostic notes later.

Aliases and common searches

English phrases tied to P0348

Useful when the driver knows the wording but not the exact DTC yet.

  • bank 2 cam sensor high input
  • bank 2 camshaft sensor high voltage
  • bank 2 cam circuit signal high
Related search intent

Queries this page can answer naturally

  • P0348 code meaning
  • what does P0348 mean
  • bank 2 cam sensor high voltage
  • bank 2 cam circuit short to voltage
FAQ

Quick questions about P0348

What usually causes P0348?

High-input Bank 2 cam codes usually come from circuit faults, connector damage, moisture, or abnormal sensor output.

Can P0348 cause reduced power?

Yes. If the ECU cannot trust the Bank 2 cam signal, it may limit performance and alter timing strategy.

Is P0348 the same as P0345?

No. P0345 is the broad Bank 2 cam-circuit fault, while P0348 specifically points to a high-input condition.